Установка джейлбрейка на ios 10.3 1. Что такое Jailbreak и как установить или удалить джейлбрейк на айфон (iOS)

Установить можно уже сейчас!

Хакер tihmstar выпустил общедоступную утилиту h3lix для джейлбрейка всех 32-битных iPhone и iPad под управлением любой версии iOS 10, включая iOS 10.3.3. Разработчик предупредил, что он протестировал джейлбрейк только на iPhone 5 с установленной iOS 10.3.3. Тем не менее, утилита для джейлбрейка должна работать на всех 32-битных моделях iPhone и iPad.

Утилита h3lix позволяет выполнить полупривязанный джейлбрейк 32-битных iPhone и iPad под управлением любой версии iOS 10. В основе программы лежит эксплойт v0rtex от разработчика Siguza.

Важно! Это первая версия утилиты h3lix, поэтому в ее работе могут быть проблемы. По словам ее разработчика, она была полностью протестирована только на iPhone 5. В связи с этим, пользователям настоятельно рекомендуется создать актуальную резервную копию своего устройства перед выполнением джейлбрейка. Впрочем, от пользователей уже поступают сообщения о том, джейлбрейк успешно выполняется и работает на любом устройстве.

Как выполнить джейлбрейк 32-битных iPhone и iPad под управлением iOS 10 – iOS 10.3.3

Шаг 1. С компьютера перейдите на сайт h3lix и нажмите по ссылке Get h3lix! для того, чтобы скачать ipa-файл утилиты для джейлбрейка.


Поставьте оценку:

Last Updated: 2019-07-23

iOS 10.3.4 Jailbreak has been released by H3lix, H3lix was supported for iOS 10 - iOS 10.3.3 and supports iOS 10.3.4 now. This is compatible with 32-bit devices and is semi untethered in nature which means that you need to rejailbreak your iOS device each time you reboot it.

H3lix can be installed via following methods.

  1. Using TaigOne - Online method(No computer needed)
  2. Direct download - Computer method

Install H3lix via TaigOne

TaigOne provides Jailbreak apps for your iOS 10.3.3 . Most popular Jailbreak applications can be installed with the compatibility for iOS 10.3 - iOS 10.3.4.

Install TaigOne

If you have need assistance for installing TaigOne, please follow the

A trusted way to install Jailbreak apps for up to iOS 10.3.3.

Step by Step Guide for installing iOS 10 - iOS 10.3.4 jailbreak (computer method)

  1. Download this ipa https://h3lix.tihmstar.net/
  2. Download Cydia Impactor as it suits to your PC Operating system (OS). http://www.cydiaimpactor.com/
  3. Open Cydia Impactor and connect your iDevice to PC
  4. Drag the downloaded ipa to Cydia Impactor launcher
  5. Enter Apple ID and continue
  6. Wait until it is done
  7. Enjoy the successful result

Other than this lengthy process we have a one click sure method to install H3lix. Want to hear that? It is TaigOne, the online method mentioned previously.

Let"s see What is TaigOne and How to Install Taigone

Step guide for TaigOne

iOS 10.3.4 has been released

Apple unexpectedly releases iOS 10.3.4. This version has came for old iPhone and iPad devices not compatible with latest iOS version.
With this OS update Apple has fixed GPS location performance issue and incorrect system date and time issue of old devices.
iOS 10.3.4 is compatible with iPhone 5 and iPad (4th generation) devices.


iOS 10.3.3 Jailbreak is not a dream anymore with H3lix. H3lix means jailbreaking the device. May be some of us do not want a jailbreak but they need those amazing jailbreak apps and Cydia most. We have the perfect solution for those.
That is TaigOne . This is a jailbreak alternative app which can be used to install Cydia on iOS 10.3.3. This app allows hassle free installation with zero risk for all jailbroken and non jailbroken devices.
Moreover, this provides most suitable jailbreak tool for your device according to your version. No need to search for the tools anymore.
Here some more from TaigOne.

TaigOne

TaigOne search the best jailbreak tool for you.

No need to search it by yourself. Not only TaigOne search the tool, but also it offers the tool. In case there are no jailbreak tools available for your version, TaigOne offers alternative tools too.

I am using iOS 10.3 - iOS 10.3.2 version, Can I still use this?

Yes, you can. TaigOne is comaptible for any iOS version.

Is this untethered or semi-tethered?

This method is not a untethered or semi-tethered. TaigOne installer is only a Jailbreak app installation process for iOS 10.3.3.

Is this method void my Apple warranty?

No, you are safe to the end. Your Apple care warrenty wii never get void from TaigOne.

Should I restore my device to remove the Jailbreak apps?

No. You can just delete the jailbreak apps easily as iTunes apps. Even you can easily remove the TaigOnein this way.

Is this method compatible with iPhone 7?

Yes, you can install Jailbreak apps for iPhone 7 or any.

What are the features of TaigOne?

TaigOne offers you the most suitable jailbreak tool for your iOS version. Then TaigOne offers you the jailbreak alternatives. Jailbreak apps and tweaks are also available with TaigOne.
24*7 customer service is available with TaigOne. So you do not need to cling on your jailbreak related problems anymore.
see more for yourself.

iPhone 7 Jailbreak

All hackers are still trying to exploit iPhone 7 but there is no jailbreak solution yet. Apple has introduced kernel patch protection for iPhone 7 and it prevents iPhone 7 from jailbreaking. TaigOne is the only available jailbreak solution for iPhone 7 which runs on iOS 10.3.

TaiG competitors

Pangu - Pangu team works for iOS 10.3 Jailbreak. Last time they released the Jailbreak for iOS 9.3.3 Also, they work for iOS 9.3.4/9.3.5 Jailbreak.


Yalu - Teen hacker could release the Yalu Jailbreak for iOS 10.2 This Jailbreak is the latest SemiTethered Jailbreak which you can install the full functional Cydia. Therefore we can expect iOS 10.3 Jailbreak from this teen hacker.


PPJailbreak- PP Team released the iOS 10.2 Jailbreak joining with Luca (Yalu Jailbreak developer).


Z Team - Z Team could release the 3rd party app store for non-jailbroken devices. It was compatible with all latest iOS versions including iOS 10.3.3.

Jailbreak Related Videos

  • Appstore Paid Apps for Free Your browser does not support the video tag.
  • TaigOne Downgrader Your browser does not support the video tag.
  • Cydia for iOS 12.1 | iOS 12.1.1 Your browser does not support the video tag.

Изначально при установке оригинальной прошивки у пользователя нет возможности редактировать важные системные файлы, и именно это делает iOS такой безопасной. Однако из-за этого теряется возможность полностью настроить устройство «под себя». Сделать систему открытой позволяет джейлбрейк. В чём же его преимущества?

1) Полный доступ к файловой системе. Можно пользоваться Cydia.

Cydia – приложение для iOS, позволяет устанавливать приложения (твики) на взломанные iPhone, iPod Touch или iPad. Благодаря твикам можно изменить интерфейс iOS, а также значительно расширить функциональность устройства.

2) Возможность установки любых приложений совершенно бесплатно.

В последнее время Jailbreak потерял много приверженцев, во многом из-за того, что Apple внедряет наиболее успешные решения из Cydia в последние версии iOS. Большую роль также сыграла сложность разработки и уход ключевых разработчиков. Тем не менее поставить джейлбрейк всё же можно, если соблюдены следующие условия:

У вас iPhone 5, iPad 4 на iOS 10.0–10.3.3. В этом случае вам подойдет такой инструмент, как H3lix .


Как установить?

1. Скачать ipa-файл с официального сайта разработчика (https://h3lix.tihmstar.net/).
2. Установить с помощью Cydia Impactor. Для этого нужно скачать инструмент с официального сайта: http://www.cydiaimpactor.com/ . Доступны версии как для Windows и Linux, так и для macOS. Устанавливаем и подключаем наше устройство к ПК или Mac. Переносим наш файл H3lix.ipa непосредственно в окно программы.


Далее нужно будет ввести свой Apple ID и пароль к нему.


Это нужно только для того, чтобы подписать приложение вашим персональным сертификатом, привязанным к Apple ID.


Начнётся установка, через некоторое время на устройстве появится наше новое приложение.

3. Запустить программу и нажать единственную кнопку.
4. Немного подождать, произойдет перезапуск рабочего стола iOS.

Всё готово!

Установка проходит так же, как и по вышеуказанной схеме.

Под iOS 11 есть инструмент Electra, однако он находится в стадии бета и в нём отсутствует поддержка Cydia. Поэтому мы советуем повременить с установкой – по крайней мере до выхода стабильной версии. Есть поддержка всех 64-битных устройств с iOS 11.0–11.1.2.


Сайт разработчика —

Для создания джейлбрейка. Теперь поддерживается iOS 10.2, но далеко не всеми устройствами - Yalu102 работает с iPhone 6s, iPhone 6s Plus, iPhone SE и iPad Pro.

Как ожидалось, большинство твиков, совместимых с iOS 10.1.1, работает и с iOS 10.2.

Что делать нужно

Внимание : все действия, описанные в статье, вы выполняете на свой страх и риск.

Шаг 1 . Загружаем последнюю версию iTunes .

Шаг 2 . Создаём резервную копию устройства. Это необходимо на случай, если что-нибудь пойдёт не так.

Шаг 3 . Загружаем IPA-файл джейлбрейк-утилиты Yalu102 [Скачать ] и Cydia Impactor [Скачать ].

Шаг 4 . Открываем Cydia Impactor, выбираем подключенное устройство, на которое хотим установить джейлбрейк.

Шаг 5 . Переносим IPA-файл yalu102 в окно Cydia Impactor.

Шаг 7 . Ждём, пока программа загрузит необходимое ПО на ваше устройство.

Не грусти, почти закончили

Шаг 8 . Открываем на iPhone или iPad Настройки –> Основные –> Управление устройством . Выбираем сертификат разработчика и два раза нажимаем Доверять .

Шаг 9 . Переходим на рабочий стол, тапаем по иконке Yalu102. Появится предупреждение, что место почти закончилось - это нормально .

После всех манипуляций гаджет перезагрузится и на рабочем столе появится значок Cydia. Если с первого раза не вышло, запустите ещё раз Yalu102.

Поздравляем, вы кулхацкеры взломали iOS 10.2! Приятного пользования.

Поставьте оценку:

(Нет голосов)

After almost seven months of its release, iOS 10.3-10.3.3 firmware now has a jailbreak for 64-bit devices. Here’s how you can download and install g0blin jailbreak on your iPhone, iPad, and iPod touch.

Table of Contents

What is g0blin?

g0blin is an iOS 10.3-10.3.3 jailbreak for iPhone, iPad, and iPod touch devices with 64-bit chipsets. It is developed by the eminent developers Sticktron and Jake James.

It currently works on the following versions only -

  • 10.3.1
  • 10.3.2
  • 10.3.3

g0blin utilizes Luca Todesco’s yalu102 KPP bypass and . This tool is a work in progress but you can use Cydia now as Jake added the “jailbreakd” daemon to this tool.

Cydia and Substrate are now working like they should. This tool doesn’t require a Substrate update.

Compatibility

Here’s the complete compatibility list of this tool with various firmware versions and devices.

iPhone

  • iPhone 5S (10.3-10.3.3)
  • iPhone 6/6 Plus (10.3-10.3.3)
  • iPhone 6S/6S Plus (10.3-10.3.3)
  • iPhone SE (10.3-10.3.3)

iPad

  • iPad Mini 3 (10.3-10.3.3)
  • iPad Mini 4 (10.3-10.3.3)
  • iPad Air 2 (10.3-10.3.3)
  • iPad Pro 12.9-inch 1st generation (10.3.3)

Incompatible devices

  • As of now, a few devices and firmware are not supported due to missing offsets. Once the developers add the necessary offsets, you will be able to use this tool. If you have an incompatible device or iOS version, just wait for an update.
  • Devices having a chipset different than A7-A9 are incompatible.
  • iPhone 7 and iPhone 7 plus are incompatible as yalu102’s KPP bypass doesn’t support them.
  • iPad Pro 12.9-inch 2nd generation, iPad Pro 10.5-inch, and iPad 5 are not supported.
  • iPhone 8/8+ and iPhone X are incompatible as they ship with iOS 11 only.

Future support

The developer will add support for these devices in the next version -

  • iPad Pro 12.9-inch 1st gen (10.3-10.3.2)
  • iPad Mini 2
  • iPad Pro 9.7-inch

Download g0blin jailbreak

  • RC 2 with Dropbear SSH client (unofficial file by arinc9)
  • RC2 (latest official IPA file)
  • RC1 (obsolete)
  • RC0 (obsolete)
  • IPA file (by xPeeks)
  • Version 3 (white screen error)
  • Version 2 (glitchy)
  • Version 1 (obsolete)

Updates

  • RC 2 with Dropbear SSH client released by arinc9. If you are on RC2, use the reinstall bootstrap with this version.
  • RC2 is out. It offers better compatibility and fixes respring panics and Cydia not showing on the home screen. You must install OpenSSH because Dropbear is no longer present in this update.
  • A new version by developer xPeeks is out. Apps such as Filza and MTerminal that require root access won’t work properly. It fixes the white screen glitch in Cydia.
  • Version 3 is out. It fixes the white screen glitch in Cydia.
  • Cydia doesn’t update the UI properly right now so wait for version 2.
  • Version 2 is out now.

Requirements

  • A compatible 64-bit iPhone, iPad, or iPod touch
  • iOS 10.3-10.3.3 firmware
  • A computer running Windows, macOS, or Linux
  • Cydia Impactor
  • Internet connection

How to jailbreak iOS 10.3-10.3.3 with g0blin

Step 1 Connect your iOS device to your computer.

Step 2 Start Cydia Impactor tool. If you don’t have it already, download it from this .

Step 3 Download the g0blin version 1 IPA file from the link above to your desktop.

Step 4 Drag this file onto Impactor’s window to start the sideloading process.

Step 5 Impactor will now ask you for your Apple ID details. Enter your email and password.

Step 6 Wait for it to complete the installation process. Once the sideload process is over, the app will appear on your home screen.

Step 7 Disconnect your device from the computer.

Step 8 Opening the app will result in the “Untrusted Developer certificate” error. Therefore, you must go to Settings > General > Profiles & Device Management and verify this app’s certificate first.

Step 9 Run the g0blin jailbreak application from your home screen. If it reboots your device or doesn’t work at the very first try, keep retrying for at least 10-15 times.

Step 10 Wait for it to inject the exploit onto your device. Once it’s done, it will display the following message.

Step 11 You can now run Cydia from your home screen.

v3 users

  • Remember, the app will alert you about when it’s safe to open Cydia. DO NOT respring via Cydia.
  • You must use the respring button in the g0blin jailbreak application to ensure tweaks and MobileSubstrate work properly (this applies only to v3 users).
  • If you are using version 3, constantly switch between Cydia and the jailbreak app in the app switcher. This will ensure Cydia works instead of showing a white screen.
  • As of now, applications that require root access such as Filza are not fully compatible. The upcoming versions will hopefully fix this issue.
  • If you are still using v3 or older versions, upgrade to the file by xPeeks.

xPeeks version users

  • You don’t need to respring.
  • Filza now works.
  • If you are getting a white screen in Cydia, simply press “i” icon at the top. Enable force-reinstall bootstrap and save. Run the jailbreak app again.

How to re-jailbreak your device after reboot

After each reboot, Cydia and all your tweaks will stop working. Therefore, you must re-jailbreak your device to make them work again.

Since a lot of users were asking about how to re-enable the jailbreak, here’s a step-by-step tutorial that lets you do just that.

  • Open the g0blin app.
  • Press the Jailbreak button.
  • Your tweaks will now start working again.
  • After every 7 days, you must sign the app with Cydia Impactor again by following the steps above. You can also use for on-device signing without a computer.

For more jailbreak tools and scene updates, give us a like on Facebook and Twitter.

Похожие статьи